Gearbox 50:1l, splined shaft, size 75
63mm Drive rubber ring. 2 Rings per wheel
SST, 40:1 Gearbox (no belt)
ø330 x 75mm. To suit Drive #DI60101
ø330 x 65mm used with Chain F601164. 5 keyway.
100 x 100 mm feed passage with PVC cover . Works with feed drops
Has straight Passage, SST. The feed inlet is controlled by the cable speed and through a feed regulator on the back of the hopper
Passage is 180°, SST. Feed intake controlled by cable speed & through regulator on hopper.
400v AC Motor. Manually adjustable feed flow. Electrically controlled hoppers can reduce the risk of overfilling Used with a motor protection, part #DE001047
24v DC Motor with SST Cabinet and with straight passage. Requires an auger controller part #D210401 for operation and speed adjustment.
100 x 100 mm feed passage with PVC cover . Works with feed drops
Button ø52mm, Disc spacing 60mm, Food Grade, Fibre Coated. Only used in Drive #DI60101
2 Shell, fits Cable #D63261
Button ø52mm, Disc spacing 80mm. 6.4mm wire
Button 52mm, spacing 80mm fits 6.4mm wire
63mm Cable Cleaning Brush - Click On
Chain Joiners (Bag of 5)
Disc ø46mm, Spacing 70mm. Hard Steel
One Directional, inc Bearing & Axle. Suit Corner #D63251
Plastic housing, double ball bearings and stainless steel screws and bolts.
with sensor connection & network. The valve is operated from central control unit.
63mm Drop with Pneumatic shutter, ø102 outlet, SST with sensors
63mm Drop with Pneumatic shutter, ø102 outlet, SST
This valve can by connection from a on/off feed sensor automatically detect an empty feeder. For usewith Ø75 mm drop tube
Feed drop mounts together with ø75mm drop tube
Feed drop mounts together with ø75mm drop tube - Yellow, Blue, Red available.
PVC Shutter operates via pull cord
63mm Drop, ø102 outlet. SST
260 x 344 mm Angle hinge (for fixing feed line to wall)
210 x 210 mm Angle hinge (for fixing feed line to wall)
ø63.5 mm - used with angle hinge for mounting feed line
Polycarb Tube 63x60.3 x 2mtr
To determine fill levels. 330 mm Long
OD 63.5mm, wall thickness 1.6mm, length 6 meters
Milled Pipe drop tube , SST for 63mm pipe
Used for connecting steel tube, drive units, hoppers, completion detectors and inspection sections.
ø63.5 x 1.6mm rolled
ø400 x 80mm, 5 keyway
1.1kw 1500rpm motor .Single or Three Phase
Control Unit, Single Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (4.0-6.2 amp)
1.1kw 1500rpm motor .Single or Three Phase
Speed sensor for mounting at the tension/idler wheel in Drive Unit
Control Unit, 3 Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (1.8-2.8A)
Control Unit, Single Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (4.0-6.2 amp)
10-40v DC completion detector used in conjunction with motorised hoppers
