Cable System 50mm (2”)

• Motor Options: 0.75kw - 1.1kw

• Gearbox Options: 40:1

• Phase: Single or 3PH

• Conveyor: Chain or Cable

• Drive Direction: Left or Right

• SST One-way Hopper

• Feed input is controlled via regulator

• One-way Receiving Hopper

• Used for additional inputs or conveyor transitions

• SST Electric Hopper

• Feed intake can be controlled, via auger within hopper.

• Motor: 400V

• Phase: Single or 3PH

• Requires separate controller and motor protection

• SST Motorised Hopper

• Feed is controlled via auger within hopper

• 24v DC Motor

• Phase: 3PH

• Requires separate controller for operation and speed adjustment.

• SST Manual Hopper

• 180° Return passage, with feed regulator.

Chain Joiners (Bag of 5)

• Cable Cleaning Brush

• Clicks onto Cable

• Use in Cable Drives only

• Various types available: Shell Connector, Link Kit, Button Connector

• Disc: ø32mm, Spacing 50mm

• SST available

• Disc Size: ø34 or ø38

• Cable Size: 2, 2.5, 3 and 5 mm.

• Materials: Aluminium or PVC

One Directional (Nylon), inc Bearing & Axle. Suit Corner Alum and PVC Corners

• Electric Drops for network controlled systems

• Used for Ration Feeding

• Ability to connect feed sensors

Fits onto 50mm pipe to use another sized manual drop. (180cm = L)

• Slide: Plastic or SST

• Drop: Plastic (Red, Yellow or Blue available)

• Both Screw assembly or Clamp style available

• To determine fill levels - 330 mm Long

• 90° Bend

Galvansied Pipe (per/ m)

Transparent Pipe (per/m)

• Pipe Coupler with Screws

Speed sensor for mounting at the tension/idler wheel in Drive Unit

‍

Cable Drive Sprocket ø27cm, 2.5cm wide. (15 teeth)

Cable Drive Sprocket to suit sm 102 Drive. (30 teeth)

40-50 Drive Sprocket ø25cm, Shaft ø4, 15 teeth, 2.5cm wide to suit C100004 Drive Shaft

ø25 mm, to suit Drive Unit #D050101

Idler/Control wheel to suit Drive Unit #D050101

One Directional (Nylon), inc Bearing & Axle. Suit Corner Alum and PVC Corners

Keyway, ø24cm, shaft ø4cm, 3.5cm wide. (14 teeth)

Requires Square Drive shaft. (15 teeth)

Nylon. (15 teeth)

10-40v DC Completion Detector Sensor.

Control Unit, 3 Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (1.8-2.8A)

Control Unit, Single Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (4.0-6.2 amp)