Galv 38/29 max 0.75kw, Equipped with 50:1 Gearbox
Sprocket Adaptor Kit to suit #F404342. (Made up with #C100004/5/6)
External ø245mm. Rubber ring to suit D101004 Drive Wheel. 2 required.
ø160mm, bore 19mm
For use with C100050-R (ID: 22mm, OD:32mm, length 22mm)
suits C38100 & C50100 Drive
suit C100017 Idler Wheel
Cable Drive Sprocket ø27cm, 2.5cm wide. (15 teeth)
40:1 Gearbox Kit (Incl. Shaft, Brackets & Pulley)
Idler/Control wheel to suit Drive Unit #D038101
40:1 Gearbox, SST. Suitable Cable or Chain
100 x 100mm Feed Passage with PVC Cover.
Hopper with 180° Passage
with shutter, SST
Has straight Passage, SST. The feed inlet is controlled by the cable speed and through a feed regulator on the back of the hopper
10-40v DC completion detector. Works in conjunction with Motorised Hoppers
Chain Joiners (Bag of 5)
Disc 28mm, Spacing 50mm (Fits 38mm Pipe).
SST, Button ø25mm.
Cable Connector 2 Shell. This fits to 5 mm cable for use in Cablefeed Drive Only.
Button 25mm, Spacing 50mm. 5mm wire (38mm System)
Cablevey Corner
Corner Bronze Bearing (Bag of 10) (Suits #C300355 Idler Wheel)
Axle to fit Idler Wheel #C300355/#C300385. Bag of 5
Axle to suit Idler Wheel #D251010. Bag of 5
One Directional, inc Bearing & Axle. Suit Corner #D038252
Corner with strong plastic housing. UV stabilized and equipped with SST screws and bolts. The inside wheel has two ball bearings.
4.5 Litre Vol Control Drop
Cablevey. Small Vol Control Drop
Cablevey. Large Vol Control Drop
Cablevey. 420 mm High, Outlet Offset, OD outlet 71mm
Cablevey. 530 mm High, Outlet Offset OD outlet 71mm
Fits onto 38mm pipe to use any 60mm drops & dispenser, 180 mm Long
Manual Slide with Plastic Closer.
Hold Down to be used with Open Tube.
Hold Down Combination with Eye Bolt Used with Open Tube
Coupler with screws. 100 mm Long, 2 Halves
PVC Cover for Open Tube #C38207-12. Comes in 3.6 mtr Length . Limited Stock
Comes in a 3.6 mtr length
To determine fill levels. 330 mm Long
Wall thickness 1.6mm. 6.1, 6.7, 7.4 meter lengths available
Swivel Hook (Bag of 10)
Sprocket Adaptor Kit to suit #F404342. (Made up with #C100004/5/6)
S Hook, Large (Bag of 20)
Pulley Bracket
Mecury Switch, insulated steel, 5A
ø160mm, bore 19mm
For use with C100050-R (ID: 22mm, OD:32mm, length 22mm)
suits C38100 & C50100 Drive
suit C100017 Idler Wheel
Control Unit, Single Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (4.0-6.2 amp)
For use with C100050-R
Corner Bronze Bearing (Bag of 10) (Suits #C300355 Idler Wheel)
Cable Drive Sprocket ø27cm, 2.5cm wide. (15 teeth)
Plastic Clamp
Adjuster, Cable
Cable Drive Sprocket to suit sm 102 Drive. (30 teeth)
40-50 Drive Sprocket ø25cm, Shaft ø4, 15 teeth, 2.5cm wide to suit C100004 Drive Shaft
Axle to fit Idler Wheel #C300355/#C300385. Bag of 5
45/50 Chain - Driving Wheel with Keyway, ø24cm, shaft ø4cm, 3.5cm wide. (14 teeth)
requires square drive shaft. (15 teeth)
Nylon. (15 teeth)
40:1 Gearbox Kit (Incl. Shaft, Brackets & Pulley)
ø26, to suit Drive Unit #D038101
Cablevey Cast Iron Idler Wheel. Stamped with 300354A
3.5” Pulley with Steel Bearing
3/4” Pulley Swivel, plastic (20mm)
Bracket with pulley
2” Pulley Swivel, plastic (45mm)
Speed sensor for mounting at the tension/idler wheel in Drive Unit
Control Unit, 3 Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (1.8-2.8A)
Control Unit, Single Phase with Relay to control Drive Unit & Hopper, inbuilt speed detector, monitoring of feeding time. (4.0-6.2 amp)